Ham radio HF2013DX-A, Instruction Manual

Page: 17 / 37

HF2013DX-A HF AMPLIFER INSTRUCTION MANUAL
Page 17 of 37
G2 Measures the current of the second grid in mA. Range from 0mA to +80mA
TEMP Measures the temperature of the exhaust from the ceramic tetrode
TUNE LCD Tune Indicator; Assists with the tuning of the Amplifier
SET button is for:
MAIN MENU
Confirmation of selection
Saving of selected value
Saving of tuning parameters
TUNE selection of TUNE mode
AUTO selection of Automatic mode
MAN selection of manual mode
∧
∧ ∧
∧∨
∨ ∨
∨
selection of band, segment, parameter, menu options
CONFIGURING AND OPERATING THE HF2013DX-A POWER AMPLIFIER
When the Power switch is selected to the ON position the amplifier will start. This will also
start the process of heating the ceramic tube.During this process the PA LCD will display
STBY and WAIT . If there is a TRX connected to the correct port, and the communication
settings are correct, and the AUTO button is selected, the PA will display the Radios
frequency and type of Transceiver. After successful heating of the TUBE (150 seconds) the
LCD will display STBY and WAIT and you can enter operating mode by pressing the
OPR Switch. The LCD will display OPR
EXAMPLE OF AUTO MODE USING ICOM TRANSCEIVER