HF2013DX-A HF AMPLIFER INSTRUCTION MANUAL
Page 22 of 37
CONFIGURING THE MUTE OPTION (ALC)
When operating the PA with anICOM TRX without TX INHIBIT for disabling TX, we
recommendblocking the TX while tuning using ALC control. The ALC is mainly used when
operating FM /RTTY/AM. The ALC Input of your TRX needs to be connected to ALC Out of
HF2013DX-A. Using
SET
and scrolling
∧
∧
∧
∧
and
∨
∨
∨
∨
we select SET MUTE and confirm it by
SET
.
You will need to configure the MUTE LEVEL for each band. Select a MUTE level that will
ensure no power transmitted by TX when performing the TUNE procedure.
LCD SETTINGS MENU LCD
By pressing
SET
and scrolling
UP
/
DWN
and selecting LCD CONTRAST (Confirming by
pressing
SET
). Adjustment of the contrast level can be made by pressing
UP
or
DWN
.
When you have achieved the correct contrast confirm by pressing
SET
.
Summary of Contents for HF2013DX-A
