Halton Max Ultra Circular (MUC) - Installation, commissioning and maintenance guide 14(31)
Version 1.0
All rights reserved © Halton
3.2
Step by step instructions
3.2.1
Connecting the damper to the ductwork
Before you start
•
Check the inside of the damper for damage and loose parts.
•
Remove any contamination from the ductwork.
•
Support the installation with a suitable suspension system. Load suspension systems only
with the weight of the unit. Adjacent components and connecting ducts must be supported
separately.
•
Wear protective gloves.
CAUTION!
Risk of personal injury or material damage.
Procedure
Position the damper so that the display is visible.
NOTE:
See safety distance in installation information chapter.
There are three possible positions of the damper:
o
Outwards
o
Side
