Page 5
1000004727 (Rev. A - 09/18)
HAC-HB*1C HAC-HB-NF-*1C
3) Mount Filter Head Assembly
Mount Filter Head Assembly into Cooler.
Unit with single supplied screw:
4) Connect Building water supply.
• Remove the 3/8” water inlet from the in-line strainer.
•
Connect 3/8” poly tubing between the inlet of the filter and
the water inlet using the supplied 3/8” x3/8” union
connector.
•
Discard in-line strainer.
Single Level Models
Two Level Models
HWF3000 WATERSENTRY
®
PLUS FILTER INSTALLATION (With Filter)
Fig. 1
• Single Level Models
• Mount on inside of left panel butted up against top lip.
• NOTE: The filter bracket is mounted with a single screw.
• Two Level Models
• Mount in left hand cooler on the inside of the right
panel, butted up against the top lip.
• NOTE: The filter bracket is mounted with a single screw.
