15
CONNECTING
20 LBS. TANK
1. Place LP tank on tank support bracket and secure with tank retention wire or level, and stable surface.
2. Make sure the burner valve is on OFF position.
3. LP tank should be in the OFF position. If not, turn the wheel clockwise until it stops.
4. Remove the protective cap from LP tank valve. Always use cap and strap supplied with OPD valve.
5. DO NOT USE A POL TRANSPORT PLUG (plastic part with internal threads)! IT WILL DEFEAT THE SAFETY FEATURE OF
THE VALVE.
CONNECTING HOSE + ADJUSTABLE REGULATOR
20 LBS. TANK
WARNING
The LP tank used with this Flat Top Griddle must meet the following requirements:
• Use the appliance only with LP (propane) gas and the regulator/valve assembly supplied.
• Installation must conform with local codes, or in their absence with National Fuel Gas Code, NFPA 54/ANSI Z223.1. Handling and
storage of LP cylinders must conform to LP Gas Code NFPA/ANSI 58.
•
Do not modify this appliance. Modifications will result in a safety hazard.
•
Apartment Dwellers: Check with management to learn the requirements and fire codes for using an LP Gas appliance at an apartment.
If allowed, use outside on the ground floor with a 10-foot clearance from walls or rails.
Regulator attached
Summary of Contents for ELITE4B
Page 1: ...1 ESSENTIALS GUIDE...
Page 5: ...5...
Page 8: ...8 8 8 WITH 8 COOKING ZONES ZONES 1 2 8 ZONES 3 4...
