SENSITRON
A Halma Company
MT2276E
GALILEO 32
Manual (EN)
P. 10/14
3.1
POWER ON
After ensuring correct installation of the Galileo 32, the unit can be switched on.
When first switched on, after the “Warm Up” time (3 minutes by default – pro-
grammable 120-180 seconds) the control panel display will show an empty pi-
cture without any indication because, at the first switch ON, in the control panel
there is not any programming.
Figure 3.1
a) Warm Up screen.
The control panel programming must be performed just by the Personal Com-
puter with the dedicate configuration software (see the previous paragraph for
the connection of the control panel to the PC).
For an already configured control panel, the normal screen will show eight chan-
nels (detectors) with their status:
Figure 3.1
b) Typical NORMAL state screen.
