SENSITRON
A Halma Company
MT2276E
GALILEO 32
Manual (EN)
P. 56/14
After associating the output (sensors) to the respective channels choose the
Voting (And) option. The “Voting Setting” window will appear in the middle of the
monitor. Select the number (quantity) of the events that have to activate contem-
poraneously in order to activate the selected output.
E.g. By setting 2, at least 2 events associated to the output and present in the as-
sociated sensors window will be necessary to activate the output.
By selecting the “Fault as Alarm” tick, if one of the sensors associated to the out-
put will be in Fault mode, it will be considered as Alarm and one event less will be
enough to activate the output.
-
Outputs Redundancy
In systems that require higher safety, 2 outputs can be used for a
single activation (or to activate two distinct actuators that put the same
system in safety conditions). The settings procedure for two redundant
outputs must be practically identical.
Figure 6.5.6
k) Redundancy tab in the outputs definition
screen
