HALE FoamLogix 1.7AHP, Description, Installation And Operation Manual

Page: 24 / 97

FoamLogix, Model 2.1A and 1.7AHP Class
“A”
Electronic Foam Proportioning Systems
24
1
'
A
20"
1'
B
Flow Sensors
Each Hale foam system requires a flow sensor for operation. Pipe size must be selected based on the
minimum and maximum water flow in the foam capable discharge. Following is a list of pipe size and rated flow
ranges, along with flow sensor saddle clamp part number. In all instances, a weld fitting may be substituted for
the saddle clamp.
Pipe Size Flow Range
GPM LPM
1.5”
10 - 350 38- 1,219
2”
20 - 550 76 - 2,082
2.5”
30 - 800 114 - 3,028
3”
50 - 1,250 189 - 4,731
4”
75 - 1,800 284 - 6,813
SCV or DCV 30 - 750 114 - 2,839
Figure 4: Pipe Size vs. Flow Range
Flow Sensor Paddle Wheel
p/n: 102714
Flow Sensor Saddle Clamp
Threads (NPT) Part Number
2” – p/n: 4842010
2.5” – p/n: 4843010
3” – p/n: 4844010
4” – p/n: 4846010
Flow Sensor Weld Fitting
Stainless Steel, p/n: 082-3060-00-0
Steel, p/n: 309020
Aluminium, p/n: 309010
Flow Sensor Cable
Dimension A & B Part Number
10’ x 14’
(3.05m x 4.27m)
113438
15’ x 19’
(4.57m x 5.79m)
113439