39
SSP Setup and Operation
SSP Setup and Operation
SSP Setup and Operation
SSP Setup and Operation
After completing the connection setup as
outlined in the Quick Start Guide (page 26),
reconnect the power to all components and
turn them on.
To access the setup menus during the source
setup procedure, you can use either the
Universal Touch Screen Remote (UTSR1)
supplied with the SSP180/220, or the front
panel controls (see page 38). If using the
UTSR1 for setup (recommended), you will
need to charge the remote overnight before
use and read the UTSR1 Owner’s Manual for
operation details.
Note: Four AAA batteries may be used
instead
of
the
supplied
rechargeable
batteries. Remember to use the supplied
rechargeable AAA batteries only if using the
Docking Station for charging.
Starting up
Starting up
Starting up
Starting up
To turn on the SSP180/220:
o
Connect the mains power cable from
a power outlet to the unit (46), and switch the
power on.
o
Wait for the Standby LED to appear
(3) and then press the Standby/On button (2)
on the front panel of the SSP180/220 (or
UTSR1) to turn the unit on.
(A start-up message will appear on the
OSD (4)).
Before you are able to watch a DVD or listen
to any music, you will need to access the
SSP180/220
Main Menu
to specify the source
parameters for each source component.
On screen display (OSD)
On screen display (OSD)
On screen display (OSD)
On screen display (OSD)
Begin the setup procedure by displaying the
menu on your TV monitor/projector, as
follows:
o
Turn the remote on by touching its
LCD screen.
o
Select SSP from the options.
o
Use the up/down arrows to scroll to
page 3 of the SSP menu.
o
Press the MENU key on page 3.
The SSP180/220
Main Menu
is displayed,
with ‘Speaker Setup’ as the first option in
a list.
o
Scroll through the list using the down
arrow until ‘Display Setup’ is highlighted.
o
Select ‘ENT’ to enter the
Display
Setup Menu
.
o
Scroll through the list using the down
arrow until ‘TV system’ is highlighted.
o
Use the LEFT (
<
<
<
<
) RIGHT (
>
>
>
>
) keys to
select either NTSC or PAL to suit your TV
system (NTSC is used in the USA; PAL is
used in most other countries).
o
Once selected, use the UP (
∧
∧
∧
∧
) DOWN
(
∨
∨
∨
∨
) keys to highlight EXIT and press ENT
to return to the
Main Menu
.
o
Exit again to save changes.
All manuals and user guides at all-guides.com
