26
Quick Start Guide
Quick Start Guide
Quick Start Guide
Quick Start Guide
The
Halcro
Logic
SSP180/220
is
a
sophisticated
product
designed
to
be
compatible with the world’s leading analog
and digital audio/video components.
Due
to
the
advanced
nature
of
the
SSP180/220, there are many different user
configurations
available
and
these
can
become overwhelming if you are unfamiliar
with electronic component setup. Please
contact your dealer for installation and setup
guidance if you are unsure how to proceed.
Before you begin the initial
setup,
make
sure
all
components are switched off
and unplugged at the mains.
This chapter provides a basic overview of the
connection requirements as well as basic
setup procedures. For more detailed setup
information, refer to the various setup
chapters in this manual.
Below are some basic notes to help you
during the installation and set up procedure:
•
read the
Important Safety Information
on
page 4
•
we recommend use of the UTSR1
Remote Control for menu setup
•
charge your UTSR1 overnight ready for
use
•
numbers shown in brackets throughout
this manual refer to the numbered
controls and connections shown on
page 14
•
flow charts showing basic setup
procedures start on page 27
•
use default source settings (page 29)
where possible
•
use the connection diagrams (pages 32
to 37) to plug in connections for TV
monitor/ projector, amplifier and source
components
•
the front panel menu does not have an
exit without save function
If you are unsure, use the UTSR1 to
access the menu and press ESC to exit
without
saving
changes.
To
save
changes select EXIT from each level until
the menu has been exited.
All manuals and user guides at all-guides.com
