60
o
To accept the new value, press ENT
or press ESC to exit without saving changes.
o
Both of these options will return you to
the
Source Setup
menu.
Note: Analog Monitor can also be used for
monitoring digital input level, however input
gain cannot be changed.
Video type
Video type
Video type
Video type
The video type parameter selects the video
input for the current source from the
Component video and HDMI inputs. The Video
type parameter also includes the Up-
conversion feature that converts Composite
and
S-Video
to
HDMI.
When adjusting the
Video type
setting, follow
the rules below:
•
select ‘Off’ if Component video and HDMI
is not used with the source being setup
•
assign the Comp 1,2,3,4, HDMI 1,2,3,4
input number to the source if the
component video or HDMI output is
required
•
assign ‘Up-conv’ (Up-conversion) if the
source being connected does not have a
Component video or HDMI output and
the display is capable of accepting
Component video or HDMI inputs
Up-conversion from Component video to
HDMI is automatic.
For optimum video performance, THX
recommends that video pass through
(bypass) is used.
To adjust the
Video type
:
o
Make sure the correct source is
highlighted in the
Source Setup
menu.
o
From the
Source Setup
menu, use the
UP or DOWN keys to highlight
Video type
.
o
Use the LEFT or RIGHT keys to
change the setting.
o
Once the setting is correct, use the
UP or DOWN keys to highlight the next
setting to be adjusted or highlight EXIT to
save and return to the
Main Menu
.
Video Out Mode
Video Out Mode
Video Out Mode
Video Out Mode
The Video out mode allows you to select
either the HDMI or Component video output
for the main display. HDMI inputs cannot be
sent to the component output.
SOURCE SETUP
Source
1
Title
SRC 1
Digital input
HDMI
Preset
No change
Analog monitor
>
>
>
>
Video type
HDMI 1
Video out mode
HDMI
EXIT
All manuals and user guides at all-guides.com
all-guides.com
