HAKO Scrubmaster B175 R, Manual

Page: 75 / 124

Height adjustment
The height adjustment (X) of the supporting rollers Fig. 7.4 has been set to 7 mm in the factory.
If striping still occurs despite optimum inclination adjustment, readjust the distance between the
supporting rollers and the lower edge of the sealing strip.
1.Place the machine on a level surface.
2.Lower squeegee. The sealing strips must now be resting vertically onto the floor.
3.Loosen nuts (figure 7.4 B) and adjust distance between supporting roller and ground
as per the table.
4.Tighten nuts.
7. Mechanical components
Figure 7.3
Sheet 75
7.1 Squeegee