Hakko Electronics Monitouch V7, User Manual

Page: 4 / 344

Preface
Thank you for selecting the MONITOUCH V7 series.
For correct set-up of MONITOUCH, you are requested to read through this manual to understand
more about the product.
For more information about the V7 series, refer to the following related manuals.
For further details about PLCs (programmable logic controllers), see the manual attached to each
PLC.
Manual Name Contents Reference No.
Reference Manual (Operation) The V-SFT operating procedure is described. 1043NE
Reference Manual (Function) The functions and instructions of the V7/V6 series are
explained. 1044NE
Universal Serial Connection Manual Universal serial specifications and commands are
described. 1021NE
Temperature Control Network The temperature control network function is explained. 1033NE
Specifications for Communication
Unit CC-LINK Instructions for CC-LINK are contained. 1028NE
Specifications for Communication
Unit PROFIBUS-DP Instructions for PROFIBUS-DP are contained. 1036NE
M-CARD SFTE Operation Manual The operating procedure of the memory card editor is
described. 1023NE
Notes:
1. This manual may not, in whole or in part, be printed or reproduced without the prior written
consent of Hakko Electronics Co., Ltd.
2. Information in this manual is subject to change without prior notice.
3. Windows and Excel are registered trademarks of Microsoft Corporation in the United
States and other countries.
4. All other company names or product names are trademarks or registered trademarks of
their respective holders.
5. This manual is intended to give accurate information about MONITOUCH hardware. If
you have any questions, please contact your local distributor.