Hakko Electronics MONITOUCH V606e, Hardware Specifications

Page: 4 / 77

Notes on Safe Use of MONITOUCH
In this manual, you will find various notes categorized under the following levels with the signal words “DANGER,”
and “CAUTION.”
Note that there is a possibility that the item listed with may have serious ramifications.
DANGER
Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury and could cause property damage.
•
Never use the input function of MONITOUCH for operations that may threaten human life or to damage the
system, such as switches to be used in case of emergency. Please design the system so that it can cope
with malfunction of a touch switch. A malfunction of the touch switch will result in machine accident or
damage.
•
Turn off the power supply when you set up the unit, connect cables or perform maintenance and inspection.
Otherwise, electrical shock or damage may occur.
•
Never touch any terminals while the power is on. Otherwise, electric shock may occur.
•
You must put a cover on the terminals on the unit when you turn the power on and operate the unit. Without
the terminal cover in place, an electric shock may occur.
•
The liquid crystal in the LCD panel is a hazardous substance. If the LCD panel is damaged, never swallow
the leaked liquid crystal. If the liquid crystal spills on your skin or clothing, use soap and wash off thoroughly.
•
For MONITOUCH using a lithium battery, never disassemble, recharge, deform by pressure, short-circuit,
nor reverse the polarity of the battery, and never dispose of the battery in fire. Failure to follow these
conditions will lead to explosion or ignition.
•
For MONITOUCH using a lithium battery, never use a battery that is deformed, leaks, or shows any other
signs of abnormality. Failure to follow these conditions will lead to explosion or ignition.
CAUTION
DANGER