Hakko Electronics MONITOUCH V606e, Hardware Specifications

Page: 36 / 77

4-4 2. DIP Switch Setting
2. DIP Switch Setting
DIP Switch (DIPSW) Setting
Set the terminating resistance for RS-422/485 connection with the DIP switch.
When setting the DIP switch, turn the power off.
* Set DIPSW1 to 4 and DIPSW8 (not used) to the OFF position.
Terminating Resistance Setting (DIPSW5, 6, 7)
•
When connecting the PLC at CN1 via RS-422/485 interface (2-wire connection), set DIPSW7 to
the ON position.
•
When connecting the PLC at CN1 via RS-422/485 interface (4-wire connection), set DIPSW5 and
7 to the ON position.
•
For the following connections at modular jack 1, set DIPSW6 to the ON position.
- Master station for multi-link 2 connection
- Temperature controller network/PLC2Way connection via RS-485
- Card Recorder: Connection with the CREC (optional)
- Serial extension I/O: Connection with the V-I/O (optional)
- Connection to the V606e at the termination of V-link connection via RS-485
CN1
MJ1
INPUT: 24VDC
CURRENT:0.4A
ASSEMBLED IN CHINA
C US
E185413
Hakko Electronics Co., Ltd.
TYPE:V606eM*0
Ser No: ******* *
(3)
Rear View
DIP switch
ON
1 2 3 4 5 6 7 8
Not used
CN1 RD terminating resistance at pins 24 and 25
MJ1 (modular jack 1) terminating resistance
Not used
CN1 SD terminating resistance at pins 12 and 13
(*1)