![background image](http://html1.mh-extra.com/html/hakko-electronics/fm2022-02/fm2022-02_instruction-manual_3318347007.webp)
6
●
Control card and
changing the
temperature setting
Please refer to the FM-202 Instruction
manual.
●
Replacing the tip
Removing and inserting the tip:
Removing the tip:
Hold the handle and pull the tip out of
the handpiece with the heat resistant
pad.
Inserting the tip:
Before inserting the tip; Insert the Tip ID
end of the tip into the process gate until
the buzzer sounds once.
Hold head part and insert the tip into the
handpiece. Push until the tip stops.
CAUTION:
The tip can be very HOT. Use the heat
resistant pad for handling hot tips, but do not
hold the hot portion of the tip, even with the
pad, for longer than necessary.
Hold this part to insert into the tweezer.
Hold the tweezer at the front to remove tip.
7. TIP IDENTIFICATION NUMBER
Please refer to the FM-202 Instruction manual.