9
●
The tip temperature is
too low.
CHECK
: Is the tip contaminated with oxide?
ACTION : Remove the oxide by cleaning the tip
on a damp sponge of Hakko 599B tip
cleaner.
CHECK
: Is the entered tip identification
number correct?
ACTION : Enter the correct value.
●
The soldering iron error
is displayed.
CHECK
: Is the connection cord broken?
ACTION : See “Checking the connection cord
for breakage”.
CHECK
: Is the FM-2022 plug disconnected?
ACTION : Connect the FM-2022.
●
The low-temperature
alarm tolerance error
occurs frequently.
CHECK
: Is the tip too small for the items to be
removed?
ACTION : Use a tip with a large thermal capacity.
CHECK
: Is the setting value for the low-
temperature alarm tolerance too low?
ACTION : Increase the setting value.
●
Tip ID error
is
displayed.
CHECK
: Does the tip come off during use?
ACTION : Enter correctly. See section 6, Opera-
tion for instructions.
NOTE:
If the buzzer sounds three times when the tip is
inserted into the process gate, there has been a
reading error. Reinsert the tip. If the Tip ID has been
torn or damaged the process gate will not be able to
read it. See the FM-202 manual for instructions of
manually entering the Tip ID.
●
Heater terminal short
circuit error
is
displayed.
CHECK
: Is the tip for FM-2022?
ACTION : Turn the power switch OFF and insert
the correct FM-2022 tip. Turn the
power switch ON.
NOTE:
This error does not display when not entering the Tip
ID.
●
The tips cannot be
closed.
• The tips will not return to the
original position.
CHECK
: Is there a foreign object between the
tips?
ACTION : Remove it.
