V
S
V
S
VACUUM
MODE
POWER
TIME
TEMP
OFF
ON
OPERATION
Operation in Manual Mode
●
Selecting Manual Mode
Press the mode selection button and set the
mode to MANUAL.
The timer does not operate.
appears on the timer display.
●
Air Blow
1. Start
Press the Start button on the handpiece
(or the foot-switch) to start the flow of air.
The hot air blows from the tip of the
nozzle, and the temperature is controlled
according to the temperature setting.
2. Stop
Press the Start switch again. Power to the
heater is shut off and cooling begins.
When the temperature falls to 200°C.
(392°F.), the air stops blowing and the
temperature display reads
.
When checking the temper-
ature setting
Press the
button for less
than one second. To change
the temperature setting, see
“Setting/Changing the Tem-
perature” on page 11.
CAUTION
Do not stop the hot air or the vacuum by
turning the power switch OFF.
CAUTION
To avoid damage to the equipment, do not turn the power switch
OFF until
appears on the display.
●
Vacuum Function
This function is used to hold the component
securely to the pads.
1. Start
Press the Vacuum button on the hand-
piece. The vacuum pump turns ON and
the part is held by suction.
2. Stop
Press and hold the Vacuum button for
more than 0.3 second. The vacuum
pump turns OFF.
CAUTION
Parts held by the pads are very hot. Be careful when removing
them from the pads.
8