![background image](http://html1.mh-extra.com/html/hakko-electronics/852/852_instruction-manual_3307226007.webp)
V
S
(Figure 8 ) Top View
(Figure 7)
C. Electrical Connection
and Power ON
1. Connect the power cord to the power
receptacle on the back panel of the
station. (Figure 7)
2. Place the handpiece on the holder.
(Figure 8)
3. Plug the power cord into a grounded wall
socket.
4. Turn the power switch ON.
CAUTION
This product is ESD-protected. Be sure to use a grounded wall
socket.
CAUTION
When not in use, place the hand-
piece on the holder.
6
●
Using vacuum function
inoperative nozzle
(see page 18.)
Attach the nozzle.
a. Retract the vacuum pipe to the shortest
length using the vacuum pipe control
knob. (Figure 5)
b. Loosen the nozzle mounting screw.
Attach the nozzle. (Figure 4)
c. Tighten the nozzle mounting screw.
CAUTION
The pad cannot be used with this type of nozzle.