background image

13

10.

11.

12.

Brackets

Brackets can be fitted at various 

heights using the coupler.
Fit the decking units. Make sure that 

the decking units are hooked into the 

grooves of the brackets and lock the 

decking units successively using the 

T-lock device.
Frames with brackets must be           

anchored both at the top and at the 

bottom.

10. SK 300 internal brackets 

These are fitted in combination with 

310 mm decking. The ends of the 

bracket platforms should be bounded 

by scaffold tubes.

11. SK 700 internal brackets

Where required, provide the decking 

on brackets with end guardrails with 

the aid of L-frames. Lock the L-frames 

using locking pins and locking hooks.

12. SK 700 external brackets

Brackets and decking should be        

fitted as described above, but without 

using the T-lock device.
Erect L-frames and lock them using 

locking pins and locking hooks. 
Erect guardrail frames, end guardrails 

and toeboards.
If the decking on brackets is on the 

top lift, the decking on the main     

scaffold should be secured using LSB 

700 platform locking units.
The scaffold should be anchored to 

the wall at the level of the bracket 

decking.

ERECTION

Summary of Contents for 564

























Reviews: