6
5 Input “
Code
” then “
#
” within 10 seconds(before the
indicator light extinguishes)
You will hear two beeps.
6 Press “
#
” 2 times.
Fir
st “#” “beep” twice, Second ”#” “beep” 3
times, Code added successful.
7
After 15 seconds, or press”#”, Exit
Long t
ime of ”beeps”, indicator light extinguish.
Open door operation
Operating steps
Locks status
1 Input “
Code
” then “
#
”
You will hear one beep, and indicator light keeps in blue, you can
also hear the sound of lock motor started, turn the handle to open
the door.
2 After 5 seconds
You will hear two beeps, red light flashes twice, back to locked
status, and the indicator light extinguishes.
3.5
Add the Card User
.
Operating steps
Locks status
1
Press “
#
” to start the lock
You will hear two beeps, front light flash blue,
and keypad illuminate.
2 Input “
Master Code
” then “
#
”
You will hear two beeps.
3 Input “
01
” then “
#
” within 10 seconds(before the
indicator light extinguishes)
You will hear two beeps.
4 Input
“group number”
such as
“002” within 10
seconds(before the indicator light extinguishes )
then “
#
” (Group number can only be used once, if
you already use 002, then input 003 or others that
is still valid)
You will hear two beeps.
5 Put the “
Card
” close to the card read area within 10
seconds before indicator light extinguishes (For
S200TM, the card read area is above the number
keys, the metal circle area, for S200MF, the card
read area is the place where number keys is ) then
“
#
”
You will hear two beeps.
6 Press “
#
” 2 times.
Fir
st “#” “beep” twice, Second “#” “beep” 3
times, card added successful.
7
After 15 seconds, or press”#”, Exit
“beep” twice, red light flashes twice, back to
locked
status,
and
the
indicator
light
extinguishes.
