Haier Super Match Series, Service Manual

Page: 305 / 483

System configuration
Domestic air conditioner
Operation
Note
During TURBO operation, in rapid COOL mode , the room
will show inhomogeneous temperature distribution.
Long period QUIET operation will cause effect of not too
cool or not too warm.
Sleep Operation
TURBO/QUIET Operation
(This function is unavailable on some models.)
When you need rapid heating or cooling, you can use this function.
Press button to enter additional options, when cycle
display to , will flash and then press ,enter to
turbo function. When cancel the function, please enter
additional options again and to cancel turbo function.
Press QUIET button, the remote controller will show ,
and then achieve to the quiet function. Press again this
QUIET button , the quiet function will be cancelled.
If the wind speed is high or middle before setting for the
sleep, set for lowing the wind speed after sleeping.
If it is low wind, no change.
5.Set the wind speed change when sleeping
Operation Mode
1. In COOL,DRY mode
SLEEP operation starts SLEEP operation stops
SLEEP
operation starts
SLEEP
operation stops
Approx.6hrs
1 hr
1 hr
1 hr
3 hrs
3 hrs
Rises 1
O
C
Rises 1
O
C
Rises 1 O C
Temp.setting
Temp.setting
Unit stop
Unit stop
In COOL, DRY mode
In HEAT mode
Decreases 2 O C
Decreases 2 O C
1 hr
2.
3.
In HEAT mode
In AUTO mode
4. In FAN mode
It has no SLEEP function.
Note
When TIMER function is set, the sleeping function can’t be
set up .After the sleeping function is set up
,
TIMER function, the sleeping function will be cancelled; the
machine will be in the state of timing-on.
1 hours after SLEEP mode starts,temp.will become
higher than temp.setting.After another 1 hours,temp.rises
by 1 futher.The unit will run for further 6 hours then stops
Temp. is higher than temp.setting so that room temperature
won’t be too low for your sleep.
1 hours after SLEEP mode starts,temp will become 2
lower than temp.setting.After another 1 hours,temp
decrease by 2
rises by 1 futher.The unit will run for further 3 hours then
stops.Temp.is lower than temp. setting so that room
temperature won’t be too high for your sleep.
The unit operaters in corresponding sleep mode
adapted to the automatically selected operation mode.
O C
O
C futher.After more another 3 hours,temp.
O
C
1
O
C
O C
if user resets
Press button to enter additional options, when
cycle display to , will flash. And then press
enter to sleep function.
(1)
TURBO Operation
(2) QUIET Operation
304