manualshive.com logo in svg

Haier MRV 5-RC VP1-112B, Service Manual

The Haier MRV 5-RC VP1-112B product comes with a comprehensive service manual that provides detailed instructions for its optimum usage. You can easily download this manual for free from our website, ensuring that you have all the necessary information to maximize the benefits of this exceptional product.

Share
Download
background image

131

•  If the valve box is transferred to a new user, this manual shall be transferred to the user, together with the conditioner.

•  Before installation, be sure to read Safety Considerations in this manual for proper installation.

• 

The safety considerations stated below is divided into “ Warning” and “  Attention”. The matters on severe accidents 

caused from wrong installation, which is likely to lead to death or serious injury, are listed in “ Warning”. However, the 

matters listed in “

 Attention” are also likely cause the severe accidents. In general, both of them are the important 

items related to the security, which should be strictly abided by.

•  After the installation, perform test run to make sure everything is in normal conditions, and then operate and maintain 

the valve box in accordance with the user manual. The user manual should be delivered to the user for proper keeping.

•  Please ask the special maintenance station for installation and repair. Water leakage, electric shocks or fire accidents 

might be caused from improper installation if you conduct the installation by your own.

•  The installation should be conducted properly according to this manual. Water leakage, electric shocks or fire accidents 

might be caused from improper installation.

• 

Please make sure to install the valve box on the place where can bear the weight of the valve box. The valve box can’t 

be installed on the grids such as the non-special metal burglar-proof net. The place with insufficient support strength 

might cause the dropdown of the machine, which may lead to personal injuries. 

•  The installation should be ensured against typhoons and earthquakes, etc. The installation unconformable to the 

requirements will lead to accidents due to the turnover of the machine.

•  Specific cables should be used for reliable connections of the wirings. Please fix the terminal connections reliably to 

avoid the outside force applied on the cables from being impressed on the cables. Improper connections and fixings 

might lead to such accidents as heating or fire accidents.

• 

Correct shapes of wirings should be kept while the embossed shape is not allowed. The wirings should be reliably 

connected to avoid the cover and the plate of the electrical cabinet clipping the wiring. Improper installation might cause 

such accidents as heating or fire accidents.

•  While placing or reinstalling the valve box, except the specific refrigerant (R410A), don’t let the air go into the 

refrigeration cycle system. The air in the refrigeration cycle system might lead to the cracking or personal injuries due to 

abnormal high pressure of the refrigeration cycle system.

•  During installation, please use the accompanied spare parts or specific parts. If not, water leakage, electric shocks, fire 

accidents or refrigerant leakage might be caused.

•  During installation, if refrigerant leakage occurs, ventilation measures should be taken, for the refrigerant gas might 

generate harmful gases upon contacting the flame.

•  After installation, check if any refrigerant leakage exists. If the refrigerant gas leaks in the room, such things as air 

blowing heaters and stoves, etc. may generate harmful gases.

•  Don’t install the valve box at the places where the flammable gases may leak. In case the gas leakage occurs around 

the machine, such accidents as fire disasters may be caused.

•  The refrigerant gas pipe, HP gas pipe and liquid pipe should be heat insulated to preserve heat. For inappropriate heat 

insulation, the water caused from the condensation will drop to get the article at home wet.

•  The electrical construction shall be implemented by the correspondingly qualified personnel in accordance with 

electrical construction standards, local electrical laws as well as specifications. Moreover, dedicated circuit must be 

used, rather than the wire pin. Insufficient capacity of the wire circuit and unprepared construction (if any) may cause 

electric shock, fires, etc.

•  During the process of grounding, the ground wire cannot be connected to the gas pipe, water pipe, lightning rod and 

ground wire of the telephone. Incomplete grounding may cause electric shock, fires, etc.

•  Install residual-current circuit breaker, or electric shock, fires, etc. will occur.

  

Warning

Summary of Contents for MRV 5-RC VP1-112B




















































































































































































































































Reviews:

No comments

Related manuals for MRV 5-RC VP1-112B

Q-Pumps QC Series Maintenance Service And Installation Manual preview
QC Series
Brand: Q-Pumps Pages: 22
Danfoss Optyma Blue OP-LGHE068NTA07D Instructions Manual preview
Optyma Blue OP-LGHE068NTA07D
Brand: Danfoss Pages: 8
KNF FK 1100 Installation Instructions Manual preview
FK 1100
Brand: KNF Pages: 22
Bard I-TEC Series Installation Instructions Manual preview
I-TEC Series
Brand: Bard Pages: 42
Zodiac Z200 M2 Installation And Use Instructions Manual preview
Z200 M2
Brand: Zodiac Pages: 16
Kawamoto Pump RCD-40A0.75 Instruction Manual preview
RCD-40A0.75
Brand: Kawamoto Pump Pages: 28
Oase SwimSkim 25 Commissioning preview
SwimSkim 25
Brand: Oase Pages: 76
Oilon S 180 Installation And Operation Manual preview
S 180
Brand: Oilon Pages: 68
DCG SA9660N Instruction Manual preview
SA9660N
Brand: DCG Pages: 12
salmson MULTI-HE Series Installation And Starting Instructions preview
MULTI-HE Series
Brand: salmson Pages: 44
T.I.P. AJ 4 Plus 100/57 AUT Operating Instructions Manual preview
AJ 4 Plus 100/57 AUT
Brand: T.I.P. Pages: 20
Brano ATESO ALFA Operating Instructions Manual preview
ATESO ALFA
Brand: Brano Pages: 46
York E1RA Series Installation Instruction preview
E1RA Series
Brand: York Pages: 12
A.O. Smith AH - 290 Specification Sheet preview
AH - 290
Brand: A.O. Smith Pages: 4
Jaga BRIZA RAD 041 Manual preview
BRIZA RAD 041
Brand: Jaga Pages: 68
DeLonghi TRD40615EBKCA Instructions For Use Manual preview
TRD40615EBKCA
Brand: DeLonghi Pages: 15
Milwaukee 8975-6 Operator'S Manual preview
8975-6
Brand: Milwaukee Pages: 13
purline HOTI M52 User Manual preview
HOTI M52
Brand: purline Pages: 20

Brands by name

Popular brands

Load more brands