Haier HWD160-B1558U1, User Manual

Page: 58 / 88

3- Control panel
14
3.7.2 Door lock
For safety reasons the appliance door is normally
locked during the washing circles. The door lock signal
is shown on the screen; when both drums are operat
-
ing, both signals are shown (Fig. 3.7.2).
To unlock the door during the washing circles touch
the pause signal on the screen and open the door
after the signal fades out.
Under some conditions, e.g. when the water level
or temperature in the drum is too high or the drum
is still rolling, the door can
not be opened even
when the programme is paused. Please note that
this is a normal situation.
You also need to unlock the door to open it during
the “delay” period.
3.7.3 Drum lamp
lamp lights up.
Note: Standby mode / energy-saving mode
The switched-on appliance goes into standbymode if it is not activated within 2 minutes
before starting the programme or at the end of programme. The display turns grey. This
saves energy. To interrupt the standbymode, touch the display at any position. If no op-
3.7.2