10-Installation
GB
28
10.5 Adjusting the feet
Install the appliance on solid ground. Adjust all feet
(Fig. 10-8) to achieve a complete level position. This
will minimize vibrations and thus noise during use. It
will also reduce wear and tear. We recommend to use
a spirit level for adjustment. Floor should be as stable
and flat as possible.
10.4 Moving the appliance
If the machine is to be moved to a distant location, replace the transport protection before
installation to prevent damage. The assemply takes place in reserve order.
Note: Keep in safe place
Keep all parts of the transport protection in a safe place for later use. Whenever the ap-
pliance is to be moved at first reinstall the protection parts.
2. Remove the 6 screws (R1-R6) from upper and 4
screws (R7-R10) from lower back reinforcement
(Fig. 10-6) and put aside.
3. Pull out the 2 iron bars I1 and I2 (Fig. 10-7).
4. Fill the 6 left holes with blanking plugs (Fig. 10-8).
S1
S2
R1-R10
10-6
I1
I2
10-7
10-8
