Safety warnings
– To be followed at all times
6
1. Installation, service, or maintenance of this appliance must be carried out
by a qualified professional. Failure to adhere to this may result in damage
to the appliance or other property, or cause injury.
2. Fit the appliance in accordance with this installation manual.
3. Be sure to use only certified parts and accessories in the installation of this
appliance.
4. Install the product on a base that can hold the filled weight of the
appliance.
5. Electrical work must be performed in accordance with all local standards
and regulations, including AS/NZS3000, and the instructions in this
manual.
6. This appliance must be connected to a dedicated electrical circuit.
7. During installation, ensure that the ground wire is disconnected last.
8. If a refrigerant leak occurs, ventilate the area immediately. The refrigerant
is flammable, so damage or injury is possible if it reaches an open flame.
9. Be aware that the refrigerant contained in this appliance does not have an
odour.
10. Do not accelerate the defrosting process or clean the evaporator when
frosted. Only a qualified person should clean the evaporator.
11. Do not pierce or burn this appliance.
12. This appliance must be installed outside and be well ventilated. A gas
leak in a poorly ventilated area could create an explosion risk.
13. Prevent insects and small animals entering the appliance. This may cause
electrical shorts, malfunctions or fire.
14.
Only qualified personnel can handle, fill, purge and dispose of the
refrigerant in this appliance.
15. If installed in a coastal or high sulfate gas region, corrosion will occur
shortening the appliance life.
Summary of Contents for HP200M1-U1
Page 23: ...Operating functions 23 ...
