Faults and protection
26
Water Properties
Acceptable Levels
pH
Min 6.5 to Max 8 .5
Water Quality
A breach of this condition may void the warranty in the event of damage caused
by water quality exceeding these characteristics.
Water supply from an unfiltered water source that may be highly conductive or have a
high mineral content may void the system warranty.
The following characteristics should not be exceeded in order for the warranty to be
conditions not to be breached.
Total hardness
200 mg/litre or ppm
Chloride
250 mg/litre or ppm
Sodium
150 mg/litre or ppm
Electrical conductivity
850
μS/cm
10 mg/litre or ppm
Magnesium
600 mg/litre or ppm
Total Dissolved Solids (TDS)
Summary of Contents for HP200M1-U1
Page 23: ...Operating functions 23 ...
