Safety warnings
– To be followed at all times
5
The outlet water temperature
of a water heater is typically
higher than the temperature
indicated on the display.
Ensure that contact to hot
water directly leaving the
appliance cannot occur.
This appliance must be
installed with an isolation
switch to the power supply.
This switch must ensure full
disconnection and be in
accordance with the wiring
rules.
Install the water heater in strict
accordance with these
installation instructions.
If the power cord is damaged,
it must be replaced by a
qualified professional.
Do not put hands or other
items into the air grid. This
may cause injury or damage
to the appliance.
Risk of damage to the
environment. This heat pump
contains the refrigerant R290.
The PTR valve drain must be
installed in a continuously
downward direction, be open
to the atmosphere, be free
from blockages, and the
potential to frost.
The PTR valve must be
operated every six months to
remove lime deposits, and to
ensure that it is free from
blockages.
Summary of Contents for HP200M1-U1
Page 23: ...Operating functions 23 ...
