Haier HOR61 Installation Instructions & User Manual Download Page 31

Page: 31 / 36

CArE ANd CLEANiNg

replacing the fuse in the side-mounted power outlets (some models only)

The two side-mounted power outlets (some models only) are internally fused with one
16 A fuse. Be careful not to overload them as this will blow the fuse.

ImpORTANT!

The power socket outlets on these cookers are

rated at 250v 10A AC only.

If required, the fuse can be replaced by following
these steps:

Turn the power to the cooker off at the wall.

Unscrew the anti-tip brackets, then pull the cooker out from

the wall, so the back fuse cover on the right-hand side
is accessible.

Remove the screw holding the fuse cover in place and

remove the fuse cover.

Open the fuse housing, as shown, and remove the blown

fuse cartridge.

Slide in the replacement fuse cartridge. Ensure that it is

rated 16 A. (Two replacement fuse cartridges are supplied
with the cooker.)

Close the fuse housing.

Refit the fuse cover.

Push the cooker back into position.

Refit the anti-tip brackets.

Turn the power to the cooker back on at the wall

and set the clock.

wArNiNg!

Tipping Hazard

All cookers can tip. Keep children away and take care. The anti-tip

brackets supplied must be installed.

failure to follow these instructions could result in injury.

wArNiNg!

Electrical Shock Hazard

Before accessing the fuse, ensure that

the cooker has been disconnected

from the power supply.

failure to do so could result in death

or electric shock.

Summary of Contents for HOR61





































Search results

Summary of Contents for HOR61

Reviews:

Related manuals for HOR61

Brands by name

Popular brands

Haier HOR61, Installation Instructions & User Manual

Search results

Summary of Contents for HOR61

Reviews:

Related manuals for HOR61

Brands by name

Popular brands