– 28 –
Step 5: Replace the Strike Plate and Door
Assembly
• On the opposite side from where removed,
replace the strike plate with its two screws
using a T-25 Torx-head screw-driver.
• Lift the door assembly into place and secure it
onto the dryer face with its two screws using a
1/4-in. hex-head screw-driver.
• Close the dryer door.
NOTE
: Make sure the door opens and closes
correctly. If not, repeat all steps making sure the
gasket, all parts, and screws are securely seated.
• Rotate the handle and hinge and replace
them back into the pockets on the opposite
sides.
Step 4: Replace the Inner Door
• Reinstall the inner door frame into the outer
door.
• Replace the fourteen screws into the inner
door, using a Phillips-head screw-driver,
securing it to the outer door.
NOTE
: Make sure the gasket is properly seated
on the inner door frame when replaced.