Haier GE APPLIANCES Connect Series, Service Manual

Page: 74 / 102

CONNECT SERIES SERVICE MANUAL
72
ENGLISH
Maintenance
Model: AUH4860ZGDA
Electronic Expansion Valve Removal
Note: Be sure power is isolated and refrigerant is recovered before removing the Electronic Expansion Valve
Step Picture Work instruction
1. Loosen the wire clamp at
the bottom of the electric box
and the screws of electric box.
Remove the upper, lower and front
panels.
Loosen the wire clamp at the bottom
of the electric box.
Unscrew the screws of electric box.
2. Remove the electric box.
The connection wires inside and
outside the electric box should be
removed.
When removing the electric box, be
careful to protect the components.
3. Remove the electronic
expansion valve.
Take off the coil of electronic
expansion valve.
Loosen the connection pipe of
electronic expansion valve using a
torch. Remove the connection pipe.
Note: When brazing the pipe, do
not let the flame burn the other
components.