Haier CA0035EAND, Service Manual, Page: 9 / 66

7
Model
Item CA0100EAND CA0130EAND
Cooling
Cooling capacity kW 98 130
Power input kW 28.9 38.4
Running current A 53.2 75.4
Heating
Heating capacity kW 103 135
Power input kW 28.7 38.2
Running current A 52.8 75
EER 3.39 3.39
COP 3.59 3.53
Max.Power input kW 45.6 56
Max. running current A 82.5 110
Power supply 3N/380V/50Hz 3N/380V/50Hz
Power factor 0.85 0.85
Refrigerant throttle type Electronic expansion valve
Capacity control 33%,67%,100% 25%,50%,75%,100%
Compressor
Brand DAIKIN DAIKIN
Type Scroll comprossor
Quantity 3 4
Input power KW 27 36
Refrigerant
Type R410A
Charge kg 5.8*3 5.8*4
Air side heat
exchanger
Type
(Slit fin & efficient inner grooved copper tube)Inner grooved
copper pipe & hydrophilic aluminum fin coil
Fan power KW 2.3 3
Air volume m³/h 127
0
0×3 127
0
0×4
Fan type Axial flow fan
Fan quantity 3 4
Water side heat
exchanger
Type Shell & Tube heat exchanger
Rated water flow m³/h 17.7 24
Inlet/outlet pipe
R 2"
(external screw thread)
R 2 1/2"
(external screw thread)
Water dirt coefficient m2.
℃
/KW 0.018 0.018
Standard pressure Mpa 1.0 1.0
Water resistance kPa 50 60
Sound pressure level 1m away dB(A) 67 68
Sound power level 1m away dB(A) 85 86
External dimension
Unit length mm 2060 2060
Unit width mm 1603 1603
Unit height mm 2170 2170
Package
dimension
Unit length mm 2200 2200
Unit width mm 1650 1650
Unit height mm 2280 2280
Weight
Unit weight kg 960 1090
Gross weight kg 990 1125
Operation weight kg 1010 1245
Safety & functional
protections
High/low Pressure Protection,Water Lackage delay Protection, Freeze Protection,Overload &
Overheat Protection, Phase Loss, Phase Sequence Protection
Note:
1. Nominal refrigerating condition: water outlet temperature is 7°C, ambient temperature is 35°C, and water flow is 0.172[m3/
(h·kW)].
2. Nominal heating condition: water outlet temperature is 45°C, ambient temperature is 7°C for dry bulb and 6°C for wet
bulb, and water flow is listed in the above table.
3. Unit operating range: conforming to GB/T 18430.1& GB/T 18430.2.
4. Scaling factor of circulating water: 0.018m2·°C/kW.
5. The specifications in the table may vary with changes in product design without prior notice.
Model