Haier CA0035EAND, Service Manual, Page: 34 / 66

32
a. If Week Timing mode is selected, the following interface will be displayed. You may press or on the [Select]
key to select Scheduled Startup/Shutdown from Monday to Sunday and over two periods a day, the selected
setting is displayed on a black background, and you can press
or on the [Modify] key to change the time.
Upon the completion of setting, press the [Exit] key to return to the previous interface, the setting and
adjustment of Week Timing mode is finished. Detailed steps are as follows:
Press or on the [Select] key to select a timing item, the setting item selected by the cursor is displayed
on a black background, and then press or on the [Modify] key to set the time; the set time is increased
or decreased by one minute for each press or on the [Modify] key, until the number is 60, the time is
increased or decreased by a hour; the display of “--:--” means invalid timing.
When the setting of four columns on this interface is finished, press
or on the [Select] key again to enter
next interface and set relevant items in the same way; and press the [Exit] key to return to previous interface
after the setting completion.
Upon the setting completion, the system unit will always start up or shut down at scheduled times set in the
Week Timing mode.
Note: when you press the [Modify] key for one second, the set time will continuously increase or decrease.
Interface of Week Timing
Mode
b. If the Cycle Timing mode is selected, the following interface will be displayed. When you press or on the
[Select] key to select set items, the selected setting column is displayed on a black background; and then you
may press or on the [Modify] key again to set the time. Upon the completion of setting, press the [Exit]
key to return to the previous interface, the setting and adjustment of Cycle Timing mode is finished.
Upon the setting completion, the system unit will start up or shut
down at scheduled times set in the Cycle Timing mode on daily basis.
c. If the Day Timing mode is selected, the following interface will be displayed. When you press or on the [Select]
key to select set items, the selected setting column is displayed on a black background; and then you may
press or on the [Modify] key again to set the time. Upon the completion of setting, press the [Exit] key to return
to previous interface.
After the function of the Day Timing mode is enabled, the system
exits the timing function
d. If the Timing Disabled mode is selected, the system will disable the timing function, and you can not enter the
timing setting interface.
3. Press [Select] key or to setting the first level password, the selected setting column is displayed on
a black background, press [Enter] to enter the change password interface, press [Select] key or to
select the password number, press [modify] key or to change the password between 0 ~ 9, change the
password and press [Enter] to confirm, and press [Exit] to return to set the first level password function
Startup on Monday 1: 00 :00
Shutdown on Monday 1: 01 :00
Startup on Monday 2: 02: 00
Shutdown on Monday 2: 03 :00
Startup on Tuesday 1: -- : --
Shutdown on Tuesday 1: -- : --
Startup on Tuesday 2: -- : --
Shutdown on Tuesday 2: -- : --
Startup on Sunday 1: -- : --
Shutdown on Sunday 1: -- : --
Startup on Sunday 2: -- : --
Shutdown on Sunday 2: -- : --
Scheduled Startup 1: --: --
Scheduled Shutdown 1: --: --
Scheduled Startup 2: --: --
Scheduled Shutdown 2: --: --
Scheduled Startup 1: -- : --
Scheduled Shutdown 1: -- : --
Scheduled Startup 2: -- : --
Scheduled Shutdown 2: -- : --
-------------------
Interface of Cycle Timing
mode
Interface of Day Timing mode
Set first level password
0000