28
Dred function
Please consult your reseller and/or installer to determine if you have a DRED device.
Connect output from your DRED device (where available) to the RJ45connector on the outdoor unit, as shown.
1. Open cover piece and locate the fixed DRM cable.
2.
a. Take out DRED module from indoor packing bag.
b. Separate DRED module to 3 parts as shown.
c. Continue to separate the DRED module to 7 parts as shown
1
2
3
4
3
2
1
3.
a. Fix Pin 1 for contractor supplied line through nut 1,seal ring 2,tapered cup nut 3 insert to stud 4.
b. Repeat step 1 for fixed DRM line.
c. Tighten the screw position on both sides.
a
b
c
a
b
c
4.
a. Tighten the DRED module to right side plate.
b.Tighten the screw .
Insert the DRED terminal into the 5 core ports in PCB , check the picture.
c. Refit the trim cover.
A
¡
æ
B
C
D
E
A
¡
æ
B
C
D
E
