3
Hague Filter Owner's Manual
THE DEALER SHOULD...
•Read this page and guide the installer
regarding day override and time of
regeneration settings prior to installation .
THE INSTALLER SHOULD...
•
Program installer settings including day
override and time of regeneration .
•
Read Operating Displays and Maintenance
section .
•
Set the time of day .
•
Read Power Loss and Error Display section .
•
Ensure that system and installation are in
compliance with all state and local laws and
regulations .
THE HOMEOWNER SHOULD...
•
Read Programming Procedures section .
•
Read Operating Displays and Maintenance
section .
The manufacturer has preset the water treatment unit’s sequence of regeneration cycles and cycle times.
GENERAL OPERATING DISPLAYS & NAVIGATION
During normal operation, the default user displays are “time of day” and “gallons per minute” . Flow rate, capacity remaining, and days to a
regeneration are optional displays . For more explanation, consult the “operating displays and maintenance section” . Pressing the
NEXT
button on a
general operating screen will cycle through the available operating displays .
In any screen other than a general operating display, the
NEXT
button will proceed to the next step, the
REGEN
button will return to a previous step,
and the
CLOCK
button will return to the general operating displays . Any changes made prior to the exit will be incorporated . If no buttons are pressed
within five minutes, the display will return to the general operating displays .
DOUBLE REGENERATION
Two generations within 24 hours are possible with a return to the preset program . To initiate a double regeneration:
1 . Press the
REGEN
button once . “REGEN TODAY” will flash on the display .
2 . Press and hold the
REGEN
button for three seconds until a regeneration begins .
Once the valve has completed the immediate regeneration, the valve will regenerate once more during the preset time .
Pre-Installati on Instructi ons
