TOE-IN ADJUSTMENT
FIG 7.40
77
NOTE:
Dimension “A” should be ½" to ¾" less
than dimension “B.” For more information
regarding toe-in, see page 76.
To adjust the toe-in of the front tires follow these in-
structions for both front steering cylinders carefully:
1. Loosen jam nut (FIG.7.41, item3)
2. Move left and right tires evenly until difference in di-
mension “ A” and “B” (FIG. 7.42) are within specified
range.
3. Screw swivel assembly in or out on steering cylinder
until the swivel joint lines up with steering plate.
4. Insert bolt through swivel joint and steering plate and
tighten jam nut.
VII.
SERVICE AND MAINTENANCE
FIG 7.42
A
B
FIG 7.41
3
Summary of Contents for STS12
Page 97: ...94 NOTES...
