40
IV.
OPERATING INFORMATION
FIG 4.47
With the engine running and the parking brake
set, lower the inductor assembly with the inductor
control box (fig. 4.46, item 2). If filling with the suck-
on attachment, leave the engine running. If filling
with the push-on attachment, turn the engine off.
FIG 4.46
1
2
E. “LOAD-ON”
CONNECTION
(CAP WHEN
NOT IN USE)
B. “SUCK-ON”
CONNECTION
(CAP WHEN
NOT IN USE)
Inductor Operation
Load water only:
B-connected, C– on, E– off.
Suck water only*:
B-connected, C-on, E-off, F-off.
Load water/induct chem:
B-connected,E-open, F-
off.
Suck water/induct chem*:
B-connected,E-open, F
-off.
Fill rinse tank:
A- handle perpendicular to sprayer.
Rinse inductor tank with rinse tank:
F-valve on.
Rinse inductor tank with nurse tank (suck or
load):
F-valve on, E-valve on.
*To activate “suck-on” pump, flip the inductor
control switch up (fig. 4.46, item 1). This will start
the pump and increase engine speed. Flip switch
down after filling is complete. Return inductor as-
sembly to upright position before moving sprayer.
C. “SUCK-ON”
SHUT OFF VALVE
(TURN OFF WHEN
NOT IN USE)
D. “SUCK-ON”
PUMP
F. “LOAD-ON”
SHUT OFF VALVE
(TURN OFF WHEN
NOT IN USE)
A. RINSE SUPPLY
CONNECTION
G. 3-WAY VALVE
FOR RINSING
CHEM INDUCTOR
TANK:
RINSE FROM
RINSE TANK, OFF
OR RINSE FROM
NURSE TANK
(TURN OFF WHEN
NOT RINSING
CHEM INDUCTOR
TANK)
NOTE:
The following fill and rinse
scenarios refer to figure 4.47
E. CHEM INDUCTOR
TANK SHUT OFF
(TURN OFF WHEN
NOT INDUCTING)
A.RINSE SUPPLY
VALVE TO FILL TANK
B.
SUCK –ON LOAD-
ON CONNECTION
(CLOSE WHEN NOT
USED)
C.SUCK-ON LOAD-ON
VALVE (CLOSE WHEN
NOT IN USE)
D. SUCK-ON
LOAD-ON PUMP
F. CHEM INDUCTOR
RINSE VALVE(CLOSE
WHEN NOT USED)
Summary of Contents for STS12
Page 97: ...94 NOTES...