3-15
SECTION 3 –
CAB
Rate Control Switches
The Rate Control Switches (located on
the side console) control the rate in which
solution is applied through the spray booms
by either the rate controller (Enable) or
operator-controlled spray rate (Manual).
NOTE: When both “MAN” and “ENABLE”
Rate Control Switches are pressed,
manual rate control is activated
through the rate controller.
Refer to the
Spray Systems Section
elsewhere in this manual for further
information.
Pump Speed/Rate Switches
The Pump Speed/Rate Switches (located
on the side console) allow you to increase or
decrease flow rate through the spray system.
NOTE: When the “MAN” Rate Control
Switch is pressed, the Pump Speed/
Rate Switches increase or decrease
pump speed/application rate from
the Hagie control system. When the
“ENABLE” Rate Control Switch is
pressed (with either “MAN” active or
inactive), a third party rate controller
increases or decreases pump speed/
application rate.
Refer to the
Spray Systems Section
elsewhere in this manual for further
information.
Main Tank Valve Switch
The Main Tank Valve Switch (located on
the side console) controls the solution tank
valve. This switch must be in the ON (Open)
position for spray application.
Refer to the
Spray Systems Section
elsewhere in this manual for further
information.
Solution Pump Switch
The Solution Pump Switch (located on the
side console) is used to turn the Solution
Pump ON/OFF.
Rate Control Switches
(Located on the side console)
-Typical View
Pump Speed/Rate Switches
(Located on the side console)
-Typical View
Main Tank Valve Switch
(Located on the side console)
-Typical View
Summary of Contents for STS 10
Page 290: ......
