SECTION 5 –
MISCELLANEOUS
5-7
Solution Connection
Foam Marker Connection
-If Equipped
Hydraulic and Electrical Connections
(Quick Connect Multi-Coupler)
•
Pull the Quick Connect Handle (located
on the Hydraulic/Electric Multi-Coupler
Assembly) DOWN to disengage hydrau-
lic/electrical connections.
•
Remove the Hydraulic/Electrical Con-
nections from the Multi-Coupler Recep-
tacle (located on front left-hand side of
machine).
8. If no other attachment is going to be
installed, re-lock the Quick-Tach Lock
Assemblies by pushing the Lock Pins IN.
NOTE: Install provided covers/caps on
disconnection points to avoid
damage and contamination. If
necessary, cover the opening with a
plastic bag (secured with tape).
Contact Hagie Customer Support for
replacement covers.
Solution Connection
(Located on front
right-hand side of machine)
-Typical View
Foam Marker Connection
(Located on front
right-hand side of machine)
-Typical View
Hydraulic/Electric Multi-Coupler Assembly
(Located on front
left-hand side of machine)
-Typical View
• Quick
Connect
Handle
• Hydraulic/Electrical
Connections
Lock Pin
-Typical View
* Engaged position shown