3-7
SECTION 3 –
OPERATING YOUR NTB
NOTE: The machine’s drive state cannot be
changed unless the Hydrostatic Drive
Control Handle is in the NEUTRAL
position.
3. Press and hold the Gauge Wheel Switch
(located on the side console) in the
DOWN position to lower the gauge
wheels.
NOTE: The Gauge Wheel Switch operates
two separate functions. In Road
Mode, the switch activates the gauge
wheels. In Field Mode, the switch
activates the lock assembly.
4. Press the Field/Road Button (located on
the Machine Display - Home Page) and
change the machine’s drive state to
FIELD mode.
NOTE: The selected drive state will
illuminate.
NOTE: The machine’s drive state cannot be
changed unless the Hydrostatic Drive
Control Handle is in the NEUTRAL
position.
5. Raise the NTB out of cradles by pressing
and holding the corresponding Left and
Right Boom/NTB Switches (located on
Field/Road Button
(Located on the Machine Display
- Home Page)
Gauge Wheel Switch
(Located on the side console)
-Typical View
Gauge Wheel
(One located on each side of NTB)
-Typical View
Field/Road Button
(Located on the Machine Display
- Home Page)