SECTION 3 –
OPERATING YOUR NTB
3-4
NTB Extension - Section 2
(40-ft. NTB only)
5. Unfold each Section 2 extension by
pressing and holding the Boom/NTB
Extension Switch (located on the side
console) in the UP (Out) position.
NOTE: Both left and right extensions will
unfold when this switch is pressed.
Fold Nitrogen Toolbar
(to storage position)
1. Ensure the Hydrostatic Drive Control
Handle is in the NEUTRAL position.
2. Ensure the machine’s drive state is in
FIELD mode on the Machine Display -
Home Page.
NOTE: The selected drive state will
illuminate.
NOTE: The machine’s drive state cannot be
changed unless the Hydrostatic Drive
Control Handle is in the NEUTRAL
position.
3. Press the Float Button (located on the
Machine Display - Auxiliary Controls
Page) and turn Float operation OFF.
• Left Boom UP
• Left
Boom IN
• Left Boom OUT
• Left Boom
DOWN
• Right Boom UP
• Right Boom
OUT
• Right Boom IN
• Right Boom
DOWN
Left and Right Boom/
NTB Switch Orientation
-Typical View
Boom/NTB Extension Switch
(Located on the side console)
-Typical View
Hydrostatic Drive Control Handle
-Typical View
Machine Display - Home Page
(Field Mode)