3-11
SECTION 3 –
OPERATING YOUR NTB
7. Press and hold the corresponding Left
and Right Section 1 Raise/Lower Switch
to raise each Section 1 attachment out of
the Lock Assembly Receptacle.
NOTE: Take caution when raising each
Section 1 out of the Lock Assembly
Receptacle. Raising the section too
high may interfere or catch with the
Lock Assembly.
NOTE: Before proceeding to fold the NTB,
ensure each Section 2 attachment is
level with each Section 1 attachment.
Refer to the following illustration.
8. Fold in the NTB by pressing and holding
the corresponding Left and Right Boom/
NTB Switches (located on the Hydro-
static Drive Control Handle) in the IN
position.
9. Guide the NTB into cradles using the
corresponding Left and Right Boom/
NTB Switches.
Lock Assembly
“Engaged/Locked”
Position Shown
Lock Assembly
“Disengaged/Unlocked”
Position Shown
Section 1 Raise/Lower Switches
(Located on the side console)
-Typical View
• LEFT
Section 1
• RIGHT
Section 1
-Typical View
Left and Right Boom/NTB Switches
(Located on the Hydrostatic
Drive Control Handle)
-Typical View
• Left Boom UP
• Left
Boom IN
• Left Boom OUT
• Left Boom
DOWN
• Right Boom UP
• Right Boom
OUT
• Right Boom IN
• Right Boom
DOWN
Left and Right Boom/
NTB Switch Orientation
-Typical View