SECTION 4 –
MAINTENANCE AND STORAGE
4-5
STORAGE
Preparing For Storage
1. Perform daily and weekly lubrication
and maintenance inspections, as
required.
2. With the engine at normal operating tem-
perature, cycle all the hydraulic func-
tions.
3. Thoroughly rinse the spray system.
NOTE: Refer to your machine operator’s
manual for further information.
4. Thoroughly wash the attachment and
touch up any chipped or damaged paint.
5. Replace any damaged or missing decals.
NOTE: Contact Hagie Customer Support for
paint touch-up recommendations and
decal replacement.
6. Apply multi-purpose grease to hydraulic
cylinder rods.
7. Refer to the spray system console manu-
facturer’s operation manual for detailed
information on monitor and flow meter
storage procedures.
8. If the Nitrogen Toolbar (NTB) attach-
ment will be stored separately, ensure
that all open ends (e.g. hydraulic, electri-
Grease Point D
(Left-hand side shown)
Grease Point E
(Left-hand side shown)
Grease Point F
(Left-hand side shown)