hager Unibar H 800 A, System Manual

Page: 60 / 92

Technical data
60 Technical changes reserved
Versions
Important elements in fulfilling functional maintenance are special components
for the functional maintenance duct, as well as the support structure for the duct
and the unibar H busbar trunking system. Depending on the ambient conditions,
various versions of duct and support structure (fastening with threaded rods or
wall brackets) are possible. The stipulations from building control test certificates
must be followed and met:
-
Compliance of the maximum permissible distances between the fastenings,
as well as a maximum permissible tensile stress of 6 N/mm
2
-
Exclusive use of building control approved fastening accessories and
partition material, including partition accessories. This material must be
provided by the customer and is not included in the busbar trunking delivery.
Dimensions
System 1) Functional maintenance
class Thickness (t)
[mm] of LS panels External dimensions 2)
[mm]
KEH33S…
E15 ... E90 45 / LS 300 x 220
KEH34S…
E15 ... E90 45 / LS 300 x 240
KEH35S... E15 ... E90 45 / LS 300 x 260
KEH36S…
E15 ... E90 45 / LS 300 x 300
KEH37S…
E15 ... E90 45 / LS 300 x 340
KEH31D…
E15 ... E90 45 / LS 300 x 420
KEH32D…
E15 ... E90 45 / LS 300 x 520
KEH33D…
E15 ... E90 45 / LS 300 x 560
KEH43S…
E15 ... E90 45 / LS 300 x 220
KEH44S... E15 ... E90 45 / LS 300 x 220
KEH45S... E15 ... E90 45 / LS 300 x 260
KEH46S... E15 ... E90 45 / LS 300 x 300
KEH47S... E15 ... E90 45 / LS 300 x 320
KEH41D... E15 ... E90 45 / LS 300 x 390
KEH42D... E15 ... E90 45 / LS 300 x 480
1) 3-sided version on request.
2)
External dimensions apply to 4-sided versions. Installation position horizontal upright.
Dimensions for 3-partition versions on request.
Reduction factors must be taken into account due to the partitions. These are available on
request.