Date : 20/09/2012
6T 8206-02a
tebis touch panel Installer Manual
GENERAL DESCRIPTION
52
4.3.10 Physical address
Is used to activate the addressing mode to program the physical address of the tebis touch panel.
-
Configuration menu: Physical address.
-
Click on
to activate the physical address.
-
From the ETS program, in the topology for your project, select your tebis touch panel.
-
By right-clicking on the mouse, select Download followed by Program Individ. Address.
Programming is complete when the tebis touch panel displays the new physical address.
Comment: After programming the new physical address, the addressing mode is automatically deactivated.
-
Click on
to exit the menu.
4.3.11 Return to factory settings
Is used to reset the configuration of the tebis touch panel to restore the default parameters.
-
Configuration menu: Return to factory settings
-
Click on ‘YES’ to confirm your choice or ‘NO’ to go back to the menu.
The system will reload the ex works configuration and reboot.
Comment: Your application and the password to access the parameters and configuration menus will be deleted.
4.3.12 Orientation settings (5’’ screen only)
The 5’’ version of the tebis touch panel can be installed horizontally or vertically. This function allows you to set the
orientation according to installation mode.
-
Configuration menu: Orientation settings.