Date : 20/09/2012
6T 8206-02a
tebis touch panel Installer Manual
EXAMPLE FOR QUICK START-UP
37
Once the parameters have been set, exit the plug-in by going to File and then Exit or by clicking on
.
Then create links with the other items in your system with the group addresses.
Let's take the example of Simple Lighting and a TXA206D output module.
Make the link between the ON/OFF input on the tebis touch panel and the ON/OFF output on the TXA206D with the
group address 6.1.1. , for example, for the command.
Make the link between the ON/OFF status indication on the tebis touch panel and the status indication on the TXA206D
with the group address 6.2.1, for example.
Proceed in the same way for your application, creating the link with the various output modules (example: TXA206D,
TXA213, TXA224, etc.).
Below is the description of the items as they appear in ETS and their links with the device view.
In red: The commands
In green: The status indications
-
Lighting dimming: General Lighting
-
Simple lighting: Reading light
3
4
1
2
1
2
3
4