hager tebis Installer Manual Download

Page: 49 / 97

Date : 20/09/2012

6T 8206-02a

tebis touch panel Installer Manual

GENERAL DESCRIPTION

Click on

to modify the password and input your code as described above.

Select the function that you want to protect by clicking on

to activate or

to deactivate.

Comment: In the plug-in you will not have to input the password to access the functionalities. The password menu
operates in the same way as the tébis touch panel as regards creating and modifying the password.

There is no limit on the number of attempts to input the password.

When downloading the application by USB key, if the configuration menu is protected, the system will ask for the
password to confirm.

4.3.5

Delete my images

Allows you to delete images not used in your configuration.

Configuration menu: Delete my images.

Confirm the deletion of the images.

NB: At this level we only delete the images not used in your configuration. The wallpaper, the screensaver and the
slide show remain in place.

Summary of Contents for tebis


































































































Search results

Summary of Contents for tebis

Reviews:

Related manuals for tebis

Brands by name

Popular brands

hager tebis, Installer Manual

Search results

Summary of Contents for tebis

Reviews:

Related manuals for tebis

Brands by name

Popular brands