background image

Step 1

: Install the Stand

Follow the steps below to connect the TV to the stand.

 

NOTE

 

x

Make sure to distinguish between the front and back of the Stand and 
Guide Stand when assembling them.

 

x

Make sure that at least two persons lift and move the PDP TV.

 

x

Stand the product up and fasten the screws. If you fasten the screws with 
the PDP TV placed down, it may lean to one side.

Connect the Guide Stand to the 
Stand using four screws  
(M4 X L12) as shown.

With your TV upright, connect the 
TV to the Stand as shown.

Fasten two screws (M4 X L12) at 
position 

1

, and then fasten two 

screws (M4 X L12) at position 

2

.

s

s

s

s

Rear

Front

s

s

s

s

1

2

Step 2

: Install the Batteries into the Remote

To install batteries into your remote control, follow these steps:

1. 

Lift the cover on the back of the remote 
upward as shown in the figure to the 
right.

2. 

Install two AAA batteries.

 

Make sure to match the + 
and - ends of the batteries 
to the diagram in the battery 
compartment.

3. 

Replace the cover.

Step 3

: Connect Power and Antenna or Cable

Quick Setup Guide

Congratulations on the purchase of your new Samsung TV. 
Read this setup guide to get your TV up and running quickly.

1-800-SAMSUNG (1-800-726-7864)
Samsung Electronics America, Inc.
105 Challenger Road Ridgefield Park, NJ 07660-0511
Samsung Electronics Canada Inc.
55 Standish Court Mississauga, Ontario L5R 4B2
Call Center hours of operation: Mon-Sun, 9:00 AM -12 
AM EST.
To register this product, visit: www.samsung.com/
register.

STOP

Please do not return this unit.

If you have problems operating your 

TV, call:

1-800-SAMSUNG (1-800-726-7864)

For web support please visit:

www.samsung.com/support

Step 4

: Connect External Devices

Connecting an AV device (DVD/Blu-ray player, cable/satellite box, etc.)

Step 5

: Run Plug & Play 

When you turn on your TV for the first time, it automatically launches the Plug & 
Play function. With Plug & Play, you can select the On Screen Display language, set 
the clock mode, and launch the TV’s channel memorizing process. 
It also displays connection instructions similar to those in this guide.
To navigate while Plug & Play is running, press the Up, Down, Left or Right arrow 
buttons on your remote. To make a selection, press the 

ENTER

E

 button. 

To skip a screen, press the 

MENU

 button. To turn on your TV, press the 

POWER

 

button on the remote or on the TV. To run Plug & Play, follow these steps:

Using your remote control, 
select the language for the On 
Screen Display (OSD), and then 
press the 

ENTER

button.

P

Select 

Home Use

, and then 

press the 

ENTER

button. If 

you select 

Store Demo

, the TV 

will reset your picture and audio 
settings every 30 minutes.

Select the 

Antenna Source

 

to memorize. you must select 

Antenna Source

 to same type 

as your cable system type. After 
selecting source, select 

Start

then press the 

ENTER

E

 

button on your remote.

 

Most cable systems are Standard(STD) systems, If you are not sure about 
what kind of cable system you have, contact your cable company.

 

If your TV is attached to a cable or satellite box, skip Steps 3 through 5. After 
Plug & Play is complete, set your TV to Channel 3 or 4, according to the 
directions for your cable or satellite box.

The TV memorizes the available 
channels. This process can take 
up to 45 minutes.

After the TV has memorized the 
channels, choose the 

Clock 

Mode

. Select 

Auto

 if you have 

a digital channel in your area. 
Select 

Manual

 if you don’t, or 

if you have a cable or satellite 
box. When done, press the 

ENTER

E

 button.

 

If you select 

Manual

the clock setting screen 
appears.

Select the daylight savings time 
setting: 

Off, On

 or 

Auto

 and 

then press 

ENTER

button.

 

This function is only available 
when the 

Clock Mode

 is set to 

Auto

.

Select the time zone in which you live, and then press the 

ENTER

E

 button.

After the time zone screen, The connection method for best HD screen 
quality is displayed. Press Right arrow button on your remote to view each 
screen in succession. Press the Blue button to skip this section.

The 

Enjoy your TV.

 screen appears. Then press the 

ENTER

button.

If You Want to Rerun Plug & Play
1. 

Press the 

SOURCE

 button on your remote, then select 

TV

 mode.

2. 

Press the 

MENU

 button on your remote to display the menu.

3. 

Press the 

 or 

 button to select 

Setup

, and then press the 

ENTER

button.

4. 

Press the 

ENTER

E

 again to select 

Plug & Play

.

Connecting an audio device (Home Theater, etc.)

Connect your TV to your Home Theater or other audio device  to enjoy enhanced 
Sound quality.

Connecting a PC

Connect your TV to a PC to use it as a Monitor.

Top view

Rear

Front

Rear

Guide Stand

Screws (M4 X L12)

Stand

VHF/UHF Antenna

Connect Ant In to

•  Wall cable jack 
•  VHF/UHF Antenna 
•  Cable or Satellite box 

Ant or Cable Out

Make sure the AC power cord is plugged in securely to 
the wall outlet and the TV.

Best to use 75 ohm (round) cable.

or

HDMI IN 

3

HDMI OUT

AUDIO OUT

VIDEO OUT

AUDIO OUT

COMPONENT OUT

AUDIO OUT

DVI OUT

DVD / Blu-ray player / HD cable box /  

HD STB (Set-Top-Box) satellite receiver

Using a DVI to HDMI Cable

HD connection (up to 720p/1080i)

Very Good Connection

Device

Best Connection

HD connection (up to 720p/1080i)

Using an HDMI Cable

DVD / Blu-ray player / HD Cable Box / 
HD Satellite receiver (STB)

Device

Using a Component Cable

Good Connection

Component connection (up to 720p/1080i)

DVD / Blu-ray player / HD Cable Box 
/ HD Satellite receiver (STB)

DVD / Blu-ray player

Use one of the connections below to connect your TV to an external A/V device. We recommend using 
HDMI for the highest picture quality.

 

When connecting to 

AV IN

 on the back of your TV, attach the video cable (yellow) to the green jack 

next to the 

AV IN

 label. The jack will not match the color of the video cable (yellow).

AUDIO IN

OPTICAL

Analog Audio connection

Digital Audio connection

Amplifier / DVD Home Theater

digital audio system

Using an Audio Cable

Using an Optical Cable

U

 Move  

 E 

Enter

Select Language of the OSD.

Language 

:

Plug & Play

English

Español

Français

DVI OUT

AUDIO OUT

AUDIO OUT

PC OUT

HD connection

Using a DVI to HDMI Cable

Using an D-Sub Cable

L

 Move  

 E 

Enter

Select ‘Home Use’ when installing this TV in your home.

Store Demo

Home Use

Plug & Play

U

 Move   

 E 

Enter    

Skip

 

Select the Antenna source to memorize.

Air

Cable

Auto

Start

Start

Start

Plug & Play

U

 Move  

 E 

Enter    

m

 Skip

Set the Clock Mode.

Clock Mode

Auto

Manual

Plug & Play

U

 Move  

 E 

Enter    

m

 Skip

Set to daylight saving time.

DST

Off

On

Auto

Plug & Play

48%

E

 Enter    

m

 Skip

Auto Program in Progress.

DTV Air : -- 

Air : --

DTV Cable : -- 

Cable : -- 

Cable : 35

Stop

Plug & Play

BN68-02613A-00

Lowest Quality Connection

Using an Audio/Video Cable

Audio/Video connection (480i only)

VCR / DVD / Blu-ray player / Cable Box /  
Satellite receiver

Device

Video Cable (Not Supplied)

Audio Cable (Not Supplied)

Audio Cable (Not Supplied)

Component Cable (Not Supplied)

HDMI Cable (Not Supplied)

Audio Cable (Not Supplied)

Optical Cable (Not Supplied)

Audio Cable (Not Supplied)

HDMI to DVI Cable (Not Supplied)

Audio Cable (Not Supplied)

D-Sub Cable (Not Supplied)

HDMI to DVI Cable (Not Supplied)

Audio Cable (Not Supplied)

Antenna Cable 

(Not Supplied)

[QSG]BN68-02613A-00Eng.indd   1

2010-01-28   오후 5:21:15

Reviews: