20
c. MEMORY - CLEAR
(1) Select the memory number you wish to
clear the data for. The number with "*"
indicates memory area where data have
been already stored.
(2) Press Shuttle Button and then the
confirmation screen with waveform data
will be displayed as shown in the right.
Press Shuttle Button to clear the
memory, or press BACK button to
cancel.
(3) To clear all the data except FREEZE in
the memory at once, select and press on
ALL and follow the instruction.
d. MODE (Baseline mode)
(1) Press Shuttle Button to change the baseline mode as follows:
• Compound mode:
Combined forward and reverse
components
• Separate mode:
Separation of forward from reverse
component
e. DIR (Flow direction)
(1) Press Shuttle Button to change waveform polarity as follows:
• Forward:
Flow toward probe is processed as positive
component.
• Reverse:
Flow away from probe is processed as
positive component.
Compound
Separate
Forward
Reverse
