Hach Sension 156, Manual

Page: 79 / 96

79
SECTION 7,
continued
3. The words
PRINT
and
Sample
, the sample number, and a
flashing
?
will be displayed.
4. Press
ENTER
to print the recalled data point.
5. Press
EXIT
to return to the reading mode.
7.2.3 Sending Multiple Data Points
1. Recall a data point. See Section 6.2 on page 70.
2. When a data point appears, press
PRINT
.
3. To send all data from the current parameter, press the
UP
ARROW
. The instrument will show
Print
, the current
parameter type, and
All
with the
?
(flashing). Select one of the
three options below:
a. To return to the next data point in Recall mode without
printing, press
EXIT
.
b. To return to the prompt for printing single data points,
press the
DOWN ARROW
.
c. To print all stored data from the current parameter, press
ENTER
. The word
PRINT
will appear until all the data has
been printed. Then the meter will return to the first
recalled sample. Press
EXIT
to return to the reading mode
or an arrow key to scroll to a specific data point.
4. To send all data, press the press the
UP ARROW
key again.
a. To return to the next data point in Recall mode without
printing, press
EXIT
.
b. To return to the prompt for printing all the data from the
current parameter, press the
DOWN ARROW
.
c. To print all stored data, press
ENTER
. The word
PRINT
will appear until all the data has been printed. Then the
meter will return to the first recalled sample. Press
EXIT
to return to the reading mode or an arrow key to scroll to
a specific data point.